Brake Shoe Holder Kit — Mahindra MM540

Small parts that decide how a drum brake behaves

Each shoe is held against the backplate by a pin, a spring and a pair of cup washers. The spring has to be firm enough to stop the shoe rattling and light enough to let it slide out to the drum when the cylinder pushes.

When the springs weaken or the pins corrode, the shoe sits at an angle and wears on one end. That shows up as a brake that is noisy, grabs unevenly, or leaves a lining with a clear taper on it.

Renew them with the shoes

These are inexpensive items that are already thirty or forty years old on most of these vehicles. Fitting new shoes on tired springs and corroded pins is a false economy — the drum comes off again long before the lining is worn out.

Clean and lightly grease the six contact pads on the backplate while it is apart. Dry pads make the shoe drag on one spot and produce the same uneven wear as a weak spring.

More Brake System parts

Mahindra MM540 spare parts · All spare parts · Catalogue data from Nonu Ventures, checked 2026-10-20.